|
Apollo Hot Tank
Model: AT5500
Platform size: 2660mm L X 1420mm W
Liquid above platform: 1050mm.
New generation caustic cleaning system including Centrifugal Filter and optional Rinse Bay
Save time, money and environment
Caustic parts cleaning is an unpleasant and costly part of the cleaning process in most workshops, however it has proven to be the only effective one-step method of cleaning those unseen areas such as oil galleries and exhaust ports
The Apollo System features:
*Faster cleaning
*No more sludged up tanks
*Waste disposal to garbage
*Save up to 90% on chemicals
*Save up to 50% on electricity
*Save numerous manhours
Specifications:
|
Apollo AT5500 Hot Tank
|
|
|
|
|
|
Model
|
AT5500 Agitating Hot Tank
|
|
Platform Size
|
1420 X 2660 mm
|
|
Floor Space Required
|
2320 X 3050 mm
|
|
Fluid Above Platform
|
1050 mm
|
|
Platform Raised Height
|
1520 mm
|
|
Column Height to Top
|
3000mm
|
|
Maximum Load
|
2500 Kg
|
|
Agitation
|
Single Acting Pneumatic
|
|
|
Oiler to Lift Ram, Remainder Oil Free
|
|
|
Automatic Water Trap Fitted
|
|
Ram Size
|
300 mm
|
|
Lid Lift
|
Lid Only and Lid with Platform
|
|
Lid
|
Full Stainless Steel Skins
|
|
Power Required
|
415V 80A 5 Wire
|
|
Heating Element Size
|
9 X 6 Kw
|
|
Current Draw (maximum)
|
80 Amps
|
|
Air Requirement
|
75 cfm @ 100 psi
|
|
|
25 x 150mm strokes/min
|
|
|
19mm air supply
|
|
Agitation Timer
|
0 – 300 hrs
|
|
Chemical Filter
|
Apollo 12” Centrifuge
|
|
Oil Skimmer
|
Disk Type
|
|
Oil Skimmer run Timer
|
0 – 300 hrs
|
|
Chemical Required
|
550 Kg Ecolab or Chemetall 129C or equivalent
|
|
Rinse Bay Length (if fitted) 2800 mm
|
|
|
Rinse Bay depth (if fitted)
|
1700 mm
|
|
|
Hot Tank Length with access platform 4150 mm
|
(platform both ends)
|
|
With rinse bay
|
3600 mm
|
(platform one end)
|
|
Hot Tank Depth with access platform
|
2870 mm
|
|
|
Crated for Export
|
3400 x 2600 x 3400 mm (L/B/H)
|
30 CuM
|
Weight 2500 Kg
|
|
Heated Rinse Tanks are available with the same dimensions less the centrifugal
filter and oil skimmer.
|
|
Rinse-off bays are available which attach to the hot tank.
When the rinse water becomes contaminated with
|
caustic it is used to top up the hot tank by simply opening a valve.
AT5500 caustic Hot Tank
Apollo caustic Hot Tanks
The new generation caustic cleaning system with centrifugal filter and optional rinse-off bay
- Heavy duty construction.
- Tank double seam welded and all welds dye penetrant tested.
- Fully insulated to minimise energy consumption.
- Stainless steel lids to eliminate corrosion problems.
- Tanks available for aluminium cleaning and paint and powder coat stripping.
|
Tanks with Centrifugal Filter
- Reduced tank volume. No sludge settlement area required, plus minimised “Dead” area behind the platform reduces tank volume by approx 30%.
- Initial chemical fill thus reduced by 30%.
- Heating energy consumption reduced by 30%.
- Chemical life greatly extended & chemical top up reduced up to 75%.
- No need to pre-clean parts.
- Cleaning times are greatly reduced. 30 to 60 minute cleaning cycles are common.
- Centrifugal filter cleaning time approx 15 minutes ever week on average.
- Waste solids from the centrifugal filter are generally suitable for disposal in the industrial waste bin.
- The angled control panel is mounted in a purpose built steel enclosure on the left front of the tank.
- Electronic timers control agitation cycle time, oil skimmer operation and centrifuge operation.
- Long life miniature plug-in relays are used for improved reliability.
- There are no microswitches to fail, magnetic reedswitches are used for ram position sensing.
- Electric over pneumatic controls are used for ease of troubleshooting.
- Pneumatic lid lift – automatic with platform lift or independent of platform for servicing.
- An optional rinse bay attaches to the tank, reducing spillage. Contaminated rinse water is used to top up the hot tank to replace boil off. This system eliminates chemical contaminated liquid waste.
- In very greasy applications (eg railway bearing degreasing) an optional oil and grease separator system removes very heavy oil and grease loads.
- An installation, operation and maintenance handbook complete with servicing diagrams and electrical circuits are supplied with each machine.
- Electrical component suppliers part numbers included to facilitate local procurement.
AT1600 and larger Tanks – Additional Features
- Surface oil is easily removed by means of the oil skimmer. Oil Skimming to take place when the tank is not agitating.
- Fail safe pneumatics lock the agitating platform and lid in the event of power or air supply failure.
|
|
